Random Access Adjustment Mode
7-3
5976227 BARCOCINE 8 13042001
Internal Cross Hatch Pattern
When using the Internal Cross Hatch Pattern ?
The Internal # pattern menu will be displayed if the internal cross hatch pattern has been selected or if no source is connected to
the projector.
Factory Preset Frequencies
The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks are custom programmable.
To select a desired cross hatch frequency, handle as follow :
1
Push the cursor keys
é
or
ê
to highlight the desired cross hatch frequency (menu 1).
2
Push the cursor keys
ç
or
è
to scroll to another page.
3
Press
ENTER
if the desired block is selected.
kHz/Hz
15.6/50
PAL/SECAM
15.7/60
NTSC
31.2/50
EDTV
31.5/60
IDTV
31.2/50
HDTV EUREKA
31.5/60
HDTV ATV
33.7/60
HDTV HIVISION
15.8/60
EGA 1
21.8/60
EGA 2
61.0/76
VGA 1,2
35.5/87
VGA 4
44.2/70
Super VGA 2
48.5/60
Super VGA 1
61.0/76
Super VGA 3
72.1/67
Super VGA 4
89.3/67
SUN 3/260
INTERNAL # PATTERN
kHz / Hz
15.6/50
PAL/SECAM
15.7/60
N T S C
31.2/50
E D T V
31.5/60
IDTV
31.2/50
HDTV EUREKA
31.5/60
HDTV ATV
Select with
é
or
ê
scroll with
ç
or
è
<ENTER> to accept
<EXIT> to return
menu 1
Random access adjustment mode selection menu.
What is possible ?
This is the main menu for the Random Access adjustment mode.
Through this menu, the following adjustments and features are accessible :
- Picture Tuning
Sync slow/fast(only for RGB inputs)
Color Balance
Peaking
Clamp Tuning
Port 2 : Video/S-Video
Line Doubler / Multiplier
- Geometry
- Convergence
- Focussing
- Color select
And also Orbiting, Contrast modulation, Soft Edge if these options are installed.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
menu 1
