Start up Adjustment mode
6-1
5976227 BARCOCINE 8 13042001
6
ENTERING THE SERVICE MENUS
Service menus
What is available in the Service menus ?
A complete set of adjustments divided in different modes are available to adjust the projector
The different mode are :
IRIS
: to autoalign and autoconverge the projector.
Guided
: Guided should be selected if the user intends to perform a complete alignment of the projected image. All the necessary
geometry and convergence adjustments are executed in a predetermined sequence.
Random Access
: Random Access should be selected if the user intends to make only a few adjustments or if the user is highly
qualified and knows the sequence of adjustments.
Installation
: Installation should be selected if the projector has been relocated and/or a different screen size is desired.
Service
: Service should be selected if the user intends to change predefined settings.
How to enter the Service Menus ?
1
Press the
ADJUST
key.
The projector displays the 'Main menu' (menu 1).
2
Push the cursor keys
é
or
ê
to select 'Service Menus'
3
Press ENTER to select.
A warning will be displayed (menu 2).
4
If qualified, press ENTER to continue
The Service menus main menu will be displayed (menu 3).
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
MAIN MENU
Image Control
IRIS Control
Sound Control
Function keys
Service Menus
menu 1
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
menu 3
Password Protection
Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password.
(Password protection is only available when the password strap on the contoller module is ON. Contact a BARCO authorized
technician when no password is requested during the adjustment procedure and password protection is desired.)
enter
password
x x x x
menu 2
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
Entering the password
Your password contains 4 digits.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' appears on the screen under the displayed text 'enter password'.
When the password is correct, you gain access to the selected item.
When the entered password is wrong, the error message 'wrong password !!!' will be displayed.
