Barco 70/60, Manual

Page: 7 / 26

2. Overview of User’s Controls
R5976691 CINE VERSUM 70/60 12042004 5
2. OVERVIEW OF USER’S CONTROLS
Overview
•
Projector
•
Remote Control
•
Remote Control Operation
2.1 Projector
Top view
The top side of the projector is provided with the following controls:
1
2
3
4
Image 2-1
Projector controls
Controls function description
Ref . Function Description
1 Infrared receiver Infrared reception diode for the IR signals from the IR transmitter.
Allows switching On/Off (Standby) of the projector.
2 Infrared reception LED indicator Lights up when a valid IR signal from the remote control has been
captured.
3 Standby LED Lights up continuously: projector in operation mode.
Lights up repeatedly 2 times short, 1 time long, off: projector in
standby mode.
Blinks fast: projector in cooling down mode after switching off (dura-
tion 1 min.).
Lights up repeatedly 1 time long, 1 time short, off: projector has been
started up in cooling down mode, waiting for lamp ignition.
4 Main power switch Button pressed, switches the projector in ’standby’ mode. This mode
is indicated by the standby LED which lights up repeatedly 2 times
short, 1 time long, off.
Table 2-1
2.2 Remote Control
Top side
The Infrared remote control buttons support the following functionality:
Buttons that are not labeled in the following remote control illustration have no function.