Barco 70/60, Manual

Page: 12 / 26

3. Making Connections
10 R5976691 CINE VERSUM 70/60 12042004
Connector View
Image 3-3
Connectors and power plug
Ref . Function Description
1 S-video Connect an S-video cable from the S-video out connector on the video
device to this connector.
2 Video (composite) Connect a composite video cable from the video (composite) out con-
nector on the video device to this connector.
RGBHV (5-cable)
RG
S
B (sync on green)
RGBS (SCART)
3
P
r
YP
b
Connect a 5-cable RGB cable from the video (component) out connec-
tors on the video device to these connectors.
4 P
r
YP
b
(component) Connect an RGB cable from the video (component) out connectors on
the video device to these connectors.
5 VGA input Connect a VGA (analog) cable from a computer to this connector.
6 Power Connect the female connector of the supplied power cable to this con-
nector. Connect the other end to an electrical outlet only after you have
finished all other connections and replaced the connector cover.
7 DVI input Connect a DVI (digital) cable from a computer or video source to this
connector.
8 RS232/RS422 in This is a service port for firmware upgrades or RS232 control of the
projector.
9 Screen Connect a 12-volt trigger cable from the screen to this connector. When
connected, the screen automatically adjusts vertically to match the
screen aspect ratio.
10 Aspect ratio Connect a 12-volt trigger cable from the screen to this connector. When
connected, the screen automatically adjusts horizontally to match the
screen aspect ratio.
Table 3-1
Aspect ratio
The screen aspect ratio is the ratio of width to height. The aspect ratio of a standard TV set is 4:3. The high-
definition TV (HDTV) format is 16:9. The projector’s screen and aspect ratio feature automatically adjusts the
screen size to match the output ratio from the projector.