11
7)
Your terminal will ask you to set
up your four-digit supervisor code.
This is the four-digit code needed
to authorise certain actions on
your terminal, such as refunds.
This should be set by whoever’s
in charge.
When you’ve entered the code,
tap
. You’ll be asked to confirm,
so type in the code again and tap
.
6)
Now you’ll see this screen.
Don’t
do anything – your terminal is just
setting itself up and rebooting.
The screen will then go black.
Your supervisor code can’t be any four sequential digits, e.g. 1234, 4567,
etc, or four digits that are the same, e.g. 1111, 3333, etc.
8)
You’ll then see ‘Supervisor code
successfully set’. Tap
.
