Barbecook SPRING 3212, User Manual

Page: 34 / 300

www.barbecook.com 34
Problem Potential causes Solutions
Flashbacks (flames outside
of venturi tubes/at control
knobs) • Burners or venturi tubes blocked • Close the gas supply and set the burners to
OFF.
• Allow the appliance to cool.
• Clean burners and venturi tubes.
Flames higher than edge of
bowl • Wind
• Gas bottle (almost) empty
• Fat in bowl and/or on burners • Turn rear of appliance to wind
• Replace gas bottle
• Clean bowl and burners
Burner whistles when set to
LOW • Gas injector, venturi tube, and/or burner
soiled
• Clean gas injector, venturi tube, and burner
Igniting burner fails
(both with igniter and
match) • Burner or venturi tube blocked
• No gas supply • Clean burner and venturi tube
• Open gas supply and press safety button
on pressure regulator (not present on all
regulators)
Igniting burners fails
with igniter • No battery inserted or battery inserted
incorrectly
• Middle burner not ignited first
• Igniter wiring not correctly connected
• Electrode damaged
• Incorrect grounding
• Defective igniter
• Re-insert/insert battery with correct polarity
• Ignite middle burner first
• Check all igniter connections and
re-connect
• Replace electrode
• Check electrodes, burners, and igniter and
re-assemble
• Replace igniter
No sparks or sound when
pressing igniter • No battery inserted or battery inserted
incorrectly
• Battery depleted
• Igniter button not correctly fitted
• Defective spark generator
• Re-insert/insert battery with correct polarity
• Replace battery
• Re-fit igniter button
• Replace spark generator
Only sound (no sparks)
when pressing igniter • Incorrect grounding
• Burner and electrode too far apart • Re-connect spark generator and
• electrodes
• Bend electrode slightly to move it
closer to burner
Sparks visible that do not
reach burners • Defective wiring • Replace wiring
Sparks visible but not
on all electrodes and/or not
powerful enough • Incorrect grounding
• Battery (almost) depleted
• Wet or defective electrodes
• Re-connect spark generator and electrodes
• Replace battery
• Dry the electrodes with kitchen paper
or replace the electrodes