barbas Unilux-3 40, Installation Instructions Manual

Page: 49 / 56

49
UNILUX-3 40 / 52 / 55 / 65
Directions for use and Installation Instructions
UNILUX-3 55 UNILUX-3 65
Combustion:
Measured in compliance with EN 13229 : 2001 and EN 13229 - A2 : 2004
Fuel Wood Wood
Output; min. - max. 5 - 11 kW 3 - 9 kW
Nominal output 8 kW 7 kW
Effi ciency 76% 76%
PM10 Dust emissions 32 mg/m
3
n
46 mg/m
3
n
Flue gas mass fl ow 9.3 g/s 6.1 g/s
Flue temperature 308°C 285°C
Chimney draught 0.12 mbar 0.12 mbar
Flue gas connection Ø150 mm Ø150 mm
(Ø148 mm ext.) (Ø148 mm ext.)
Weight 92 kg 92 kg
Inside:
Dimensions
- surface area (w x d)
0.42 x 0.21 = 0.09 m
2
0.48 x 0.28 = 0.15 m
2
- clear fi re opening (h x w) 450 x 418 mm 285 x 518 mm
Internal panels Vermiculite insulation plates 700 kg/m
3
, 1100°C
Bottom Vermiculite insulation plates 700 kg/m 3 , 1100°C
Inner lining Steel (heat-resistant and rust-proof)
Retardant plate (brake plate) Vermiculite insulation plates 700 kg/m 3 , 1100°C
Flue gas fl ap (operated by door) Stainless-steel
Grate Steel
Outside:
Construction Sheet-steel casing
Doors Flat door opening to left
Shutter with fi xed handle
Operation: • Handle for opening the door
• Combustion air supply slider
Single combined slide for controlling the
primary, secondary and tertiary air supply
Ash collection: Ashtray with grate
Combustion air supply: Minimum 50 cm
2
opening in the room where
the fi re is placed (= Ø80 mm).
Option for Unilux-3 55 and 65: Convection set