barbas ENERGA 70-55 TUNNEL, Installation Instructions Manual

Page: 18 / 62

18
ENERGA 70-55 TUNNEL
2.3 ACCESSORIES
The following accessories can be supplied by your dealer:
2.4 BASIC REQUIREMENTS FOR POSITIONING BUILT-IN FIRES
General
The appliance may only be set up in a room in which the location, architectural con-
struction and activity is not endangered by the presence of a fi re. The surface on which
the appliance is to be placed must be correctly shaped and big enough to accommodate
the appliance safely (in compliance with DIN 18895, part 1).
When fi tting, all local and/or national safety regulations must be followed closely, parti-
cularly in rooms with walls/fl oors containing fl ammable material. If in doubt, consult the
fi re prevention department of your local fi re brigade and/or the architectural department
of your local authority.
Built-in fi res may solely be used in:
• Rooms with at least one outer door or window that can be opened;
• A suite of rooms connected directly or indirectly with each other with a collective
supply of air.
In the aforementioned cases, the capacity of the room(s) must be at least 4 m³ per kW
of nominal output.
Built-in fi res may only be constructed or moved into rooms where at least 360 m 3
combustion air per hour and per m 2 clear fi re opening can circulate. If there are any
other fi re-burning appliances in the same room, at least 540 m³ combustion air per hour
and per m² clear fi re opening must be in circulation.
Other appliances must have at least 1.6 m³ combustion air per hour, per total nominal
output in kW at a calculated pressure difference of 0.04 mbar with the ambient air.
Part no Accessorie
330171 3-Sided 35 mm frame Energa 70-55 / Energa 70-55 Tunnel
330172 4-Sided 35 mm frame Energa 70-55 / Energa 70-55 Tunnel
312829 Convection set General : (for convection air extraction)
302188 • 1x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
309730 • 2x Collar adaptor Ø125 mm
304040 • 4x Hose clamp Ø125 mm