Barazza 1PZP9N, Instruction Manual

Page: 47 / 60

11
Error
Code
Meaning Behavior
Possible
Causes
Remedy
E2
Overheat of temperature
sensor for cooking zone
Corresponding
cooking zone is
turned OFF
Empty cookware Do not heat-up empty
pots
Wrong cookware Use appropriate
cookware
Pot or glass tempe-
rature is too high.
Electronic temperature
too high
Cool down system
E3
Wrong pot Corresponding
cooking zone(s)
is/are turned OFF
Cookware is losing its
magnetic characteri-
stics
Use appropriate
cookware
Internal error in genera-
tor’s circuitry
Contact technical
support
Pot creates on the
module an improper
operating point which
can destry devices, e.g
IGBT.
1. The error is auto-
matically cancelled
after 8s and the
cooking zone can be
used again. in case
of further upcoming
errors the pots have
to be changed.
2. Contact technical
support.
E4
Configuration error Cooking zone
cannot be turned
ON
Induction module is not
configured yet
Contact technical
support.
Induction module confi -
guration data error
Erase and re-configu -
re cooking zone.
Contact technical
support.
E5
No communication betwe-
en User Interface and
Induction Generator
Cooking zone
cannot be turned
ON
LIN cabling or power
supply cabling defective
(e. g. missing line
conductor)
Contact technical
support.
No mains voltage on
slave boars
Contact technical
support.
Internal error in genera-
tor’s or filter’s circuitry
Contact technical
support.
(Mixed version) HiLight
Relay Voltage Error -
Defect hardware device
Contact technical
support.
Error configuration data Contact technical
support.
• Error Code:
EN