Barazza 1FICN9E, Instruction Manual, Page: 45 / 108

45
11 FUNCTION DESCRIPTION
Automatic cooking
Automatic cooking means that cooking will end automatically based on the
parameters of the cooking function and the temperature selected.
Semi-automatic cooking
This method is used to start cooking immediately, entering the desired cooking
time.
1.
Select the desired function and adjust (if necessary) the temperature as
described earlier in this document.
2.
Press the key . At this point will flash on the timer screen.
3.
Set the desired cooking time with the and keys. appears on the
status display. (if the duration is increased to 0:00, two warning beeps will occur).
4.
Pressing the key , disappears and cooking starts. The end of cooking
time is shown on the timer display, together with the symbol .
Automatic cooking
This method is used if the food is intended to be ready at a particular future time.
Therefore, this method is also called “delayed cooking”.
1.
Perform steps 1 to 3 of the half automatic cooking (setting the cooking time).
2.
Press the key again. flashes on the timer screen together with the
current end cooking time.
3.
Adjust the desired end time with the e keys. on the status display
disappears, while does not, indicating that de layed cooking has been
programmed and consequently does not start immediately.
4.
Press the key , disappears and cooking starts. The end of cooking
time is shown on the timer display, together with the symbol .
During cooking
The 5 bars on the temperature display indicate the actual oven temperature. Each
bar is assigned to one fifth of the regulated value. The high-arrow next to the bars
flashes when the heating elements are active at that time.
End of automatic cooking
After cooking has finished automatically, the temperature display will indicate the
residual heat, if present (See: indication of residual heat), will flash and will
sound for 7 minutes. Tapping interrupts the sound.