Barazza 1FICN9E, Instruction Manual, Page: 44 / 108

44
11 FUNCTION DESCRIPTION
Modification of the assigned default cooking temperature
The temperature setting on the temperature display can be changed by touching the
key. The temperature display starts to flash. To set the desired value use or in 5
degree steps.
Note: to replace the default temperature setting for this function with this temperature set
permanently, touch for approximately 5 seconds, until a beep is heard. The factory-set
default temperature for this function is now permanently changed.
Manual cooking
Once a function has been selected, touching the key, cooking begins with a tem-
perature adjustment on the temperature display (if present).
disappears and the cooking time begins to appear on the timer display. Cook-
ing will continue until it is manually terminated by the user or until the maximum per-
mitted cooking time, depending on the selected cooking temperature, has elapsed.
With half and complete automatic cooking, as described below, cooking is automat-
ically terminated according to the parameters entered by the user before cooking
(tapping)
To suspend, modify or terminate cooking
The contact during cooking interrupts the cooking process and starts
flashing, while other parts of the display remain unchanged. All oven and turbo fan
heating elements are temporarily disabled. Cooking is suspended.
To finish cooking, tap again; all the cooking indications on the display disap-
pear. The temperature display will indicate the residual heat, if present (See: indication
of residual heat).
Note: after cooking is finished, touching the key will restore the previous function and
the temperature settings on the screen; with a second tap, it is possible to start cooking
again.
To change the cooking parameters (function, temperature, etc.), use the appropriate
buttons as described in this document. Tapping will restart cooking with the
modified parameters.