6
A18. Pre-ground coffee funnel door
A19. Measure
A20. Compartment for measure
A21. Pre-ground coffee funnel
A22. Power cable
A23. Main switch
A24. Tray
A25. Water softener filter (if present)
A26. IEC connector
Description of control panel
(page 3 -
B
)
A number of buttons on the panel have a double fun-
ction. This is indicated in brackets in the description.
B1. Display: guides the user in using the appliance.
B2. Coffee taste button
.
B3. One/two cups short coffee button
.
B4. One/two cups standard coffee button
.
B5. One/two cups long coffee button
.
B6.
button to activate or deactivate menu
parameter setting mode
B7. Pre-ground coffee button
.
(When you access the MENU:
button
to display the next menu parameter).
B8. Rinse button
: performs a brief rinse to
heat the infuser.
(When you access the MENU:
button
to modify menu parameters).
B9.
button: to deliver hot water or confirm.
(When you access the MENU:
button to
confirm menu parameters).
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product
is complete and undamaged and that all accessories
are present. Do not use the appliance if it is visibly
damaged. Contact Customer Services.
Installing the appliance
Important!
When installing the appliance,
respect the following safety warnings:
•
Installation must be performed by a qualified
professional in compliance with legislation in
force in the country of installation (see Built-in
installation).
•
The packing elements (plastic bags, polystyrene
foam, etc.) should be kept out of reach of chil-
dren as they are a safety hazard.
•
Do not install the appliance in rooms where
the temperature may drop to 0°C or lower (the
water in the appliance could freeze and cause
damage).
•
You should customise the water hardness as
soon as possible following the instructions in
the “SETTING WATER HARDNESS” chapter.
Connecting the appliance
Danger!
Check that the mains power supply
voltage corresponds to the value indicated on the
appliance rating plate.
Connect the appliance to an efficiently earthed and
correctly installed socket with a minimum current
rating of 10A only.
If the power socket does not match the plug on the
appliance, have the socket replaced with a suitable
type by a qualified professional.
To comply with safety directives, an omnipolar swi-
tch with a minimum contact distance of 3 mm must
be installed.
Do not use multiple sockets or extensions.
To learn to use the appliance correctly, the first time
you use it follow the detailed instructions in the fol-
lowing paragraphs.
Important!
Safety cutout devices must be in-
cluded in the mains power supply in compliance with
the installation regulations in the country concerned.
AUTOMATIC CUP TRAY LIGHT
When the appliance is turned on, the lights (A6) auto-
matically light up the spout and cup tray.
The lights stay on until the appliance is turned off.
While coffee, steam or hot water is being delivered,
the cooling fan comes on.
At the end of the function, the cooling fan remains
on to avoid condensation forming inside the cabinet.
After several minutes, the fan goes off automatically.
