®
May 2019 (v3)
7
SETTE™ 30 MANUAL
TIME BASED GRINDING OPERATION
Place the grounds bin on the arms. Use the up and down arrows
to change your desired grind time. Press the START button
(>ll) to begin grinding. While grinding, the screen will count UP
the seconds and stop when the preset time is reached. When
the screen reaches the preset time, the motor will stop and the
display will reset again to the programmed time. For manual
operation, press and hold the START button until you obtain the
desired amount of coffee, then release the START button, the
grinder will then stop with the screen showing the total amount
of seconds run. To get out of manual mode, press STOP.
PULSE FUNCTION & MANUAL MODE
The Sette 30 also has a pulse function/manual time grinding mode. To turn the grinder on in this mode, simply hold the
START button for more than 2 seconds, the display will flash “- - -” and grinding will commence. You are now in pulse mode.
The motor will continue to run as long as your finger is on the START button and will turn off when you remove your finger.
To Exit this mode press STOP.
ADJUSTING THE DEVICE HOLDERS FROM BIN TO PORTAFILTER MODE
The arms that hold your grounds bin, can also be converted to portafilter mode, and used as a rest while you dose
directly into a portafilter. To convert the arms, pull them straight out, rotate 90° and reinsert.
HOW MUCH COFFEE SHOULD I GRIND?
At an espresso fine setting, the Sette 30 grinds coffee at around 3.6g per second (this will vary based on coffee and grind
size), which means you get a full double-shot worth of coffee in about 5 seconds give or take.
At a grind size for an automatic brewer (like a drip coffee maker), the Sette 30 grinds coffee at around 5g per second (again,
this will vary based on your coffee and specific grind size). For a 6 cup batch of drip coffee, you’ll want around 10 seconds.
If you find that either time produces too much or too little coffee, you can easily add or remove time from the grind cycle
with the up and down arrows.
Note: this does not allow hands-free grinding into the portafilter, it helps to position the
portafilter for improved grounds transfer from the grinder.
