background image

®

May 2019 (v3)

12

SETTE™ 30 MANUAL

WARRANTY & SERVICE

U.S. & CANADIAN WARRANTY INFORMATION

Limited Warranty for Baratza Grinders is 1 year from the original date of purchase or 25 hours of cumulative run time, 
whichever occurs first. This warranty covers all defects in materials and workmanship (parts and labor) including free ground 

transportation to and from our repair facility within the US and Canada. This warranty does not apply to: improper use, lack of 
cleaning, abuse, normal wear and tear, lack of proper adjustment, foreign objects (stones, screws, etc.) in the beans, or uses 
outside the intended use of grinding whole roasted coffee beans. If your grinder fails within one year, email 

support@baratza.

com

 or call 425-641-1245. For additional warranty, support, or troubleshooting information, go t

www.baratza.com

.

INTERNATIONAL WARRANTY INFORMATION

For all countries outside the US and Canada, the warranty, support and service is provided by the International Retailer you 
purchased from. If you purchased this grinder from a reseller outside of the country you live in, you may be responsible for 
any shipping costs to service the grinder, and you may need to pay for service.

PROOF OF PURCHASE & PRODUCT REGISTRATION

You can register your grinder at 

www.baratza.com/register-your-grinder

. Registration will enable us to contact you in the 

unlikely event of a product safety notification and assist us in complying with the provisions of the Consumer Product 

Safety Act. The serial number is located on the bottom of the grinders. Please keep your sales receipt that shows the date 
of purchase.

FOR REPAIRS OR QUESTIONS

Email: 

[email protected]

For Parts and Information go to: 

www.baratza.com

For Troubleshooting Help: 

www.baratza.com/troubleshooting

Summary of Contents for SETTE 30













Reviews: