background image

FORTÉ™ AP/BG MANUAL

August, 2022 (v4)

11

CARE & CLEANING 

Routinely cleaning the grinder is important to ensure that it performs 
as intended. With standard home use, the grinder should be cleaned at 
least once per month. If darker roasted coffee, oily coffee, or flavored 
coffee (which has had essential oils added) is being used, more 
frequent cleaning may be necessary.

Caution: Do not put the bean hopper, hopper lid, or grounds bin in the dishwasher. 

Hand wash only. Do not immerse the grinder housing in water. Do NOT wash the 

burrs with water.

REMOVING THE HOPPER:

1. 

Ensure the bean shut-off knob 

(3)

 on the hopper 

(2)

 is in the closed position. The side of the shut-off knob 

that says ‘CLOSED’ should be facing up. 

2. 

Grind the remaining beans in the grinder.

3. 

Grip the hopper and rotate it counterclockwise to unlock it.

4. 

Lift the hopper up and off the grinder.

CLEANING THE HOPPER AND GROUNDS BIN:

1. 

Empty the hopper and the grounds bin 

(8)

 of coffee.

2. 

Wash the hopper and grounds bin in warm, soapy water with a soft sponge or cloth. If necessary, rinse. The 
parts can be dried with a clean, dry cloth or set aside to air dry.

CLEANING THE BURRS AND GRIND CHAMBER:

To manually clean the burrs 

(5)

 and the grind chamber, the upper burr carrier 

(4)

 will need to be removed from the 

grinder.

1. 

Place the included burr removal tool 

(17)

 on the upper burr carrier so that the notches on the tool interlock 

with the wings on the upper burr carrier.

2. 

Rotate the burr removal tool clockwise to unscrew the upper burr carrier from the grind chamber. If needed, 
grip the tool with pliers for additional leverage.

3. 

Once the upper burr carrier is unscrewed completely, lift it up and remove it from the grinder.

Summary of Contents for Forte AP














Reviews: