Installation & Operating Instructions
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
Specifications subject to change without notice.
rev. 02/09/21
39021_RCV_900_BACnet_2020
12 of 12
900MHz WAM Connect
The BAPI gateway can be backed up and restored
locally. This allows you to reset the gateway in the
rare instance that it would be locked up. It also allows
you to copy the configuration to a new gateway if you
chose to replace a gateway, eliminating the need to
perform a network setup procedure on the gateway.
BACKUP - LOCAL
1. Create a folder on your computer or server to
store and retrieve the backup content.
2. Go to the center “Backup” tab and click the “Local”
icon and then click the “Backup” button (Fig 17).
This will open the “Select Backup Folder” screen
(Fig 18).
3. Select the local folder that you created in Step #1
and click “Open” to save the backup to the folder.
You will receive a “Backup Successful” message
as shown in Fig 19.
RESTORE - LOCAL
1. Go to the “Backup” tab on the WAM Design
Configuration Screen of the gateway that you
would like to restore (or the new gateway if
replacing the gateway) and click the “Restore”
button.
2. Select the backup folder on your local computer or
network from in the “Select Folder” Screen (Fig 20)
and click “Open”. You will receive a “Restore
Successful” confirmation screen (Fig 21) and also a
request to reboot the system. Click “yes”.
Backup or Restore the Gateway
Fig. 17:
Backup Tab on the Design Application
Configuration Screen
Fig. 18:
Select Backup Folder
Screen.
Fig. 20:
Select Restore Folder
Screen.
Fig. 21:
Restore
Successful Message.
Fig. 19:
Backup
Successful Message.
Processor:
AM3358 1GHz ARM® Cortex-A8 Processor
On-board Flash:
4GB Rated
Voltage:
12 to 42 VDC, 20 to 30 VAC
Rated Power:
12 Watt
RAM:
1 GB Cache 256KB Power over Ethernet (PoE) Power Requirements 3 watts @ 48 volts
Specifications for the 900MHz WAM Connect
