Baoli CPCD 100, Operating And Servicing Manual

Page: 67 / 112

61
5. Steering system
5.1 General description
Steering system contains mainly a steering hand wheel, a steering column, a
cardan joint, a powered steering unit, a steering axle and a steering cylinder.
The steering shaft is connected with the steering unit and steering hand wheel by
the joint. The steering column may be tilted properly forward or backward. Turn the
hand wheel clockwise, the forklift truck will turn to the right, on the contrary, the truck will
turn to the left.
Main parameter and structure of the steering system sees below:
Item Parameter & structure
Type Rear wheel steering powered
Diameter of steering hand wheel mm 360
Steering
unit
Type BZZ powered steering unit
Displacement min 280
Rated pressure MPa 16
Steering
cylinder
Type Double-action type
Cylinder dia. / Rod dia. mm
Φ115/Φ85
Stroke mm
2×216
Divider
Setting pressure MPa 12.5
Rated displacement
l/min
27
Steering
axle
Type Transverse cylinder type
Steering angle(outside/inside)
76°/54°
Rear tread mm 1700
Interval of knuckle spindle mm 1500
Diameter of cardan joint mm
Φ42
Wheel
Tire 9.00-20-14PR
Rim 7.00-20
Pressure KPa 760
5.2 Hand wheel
Hand wheel is operated in normal way, that is to say,
when turning the hand wheel right, the truck will turn right.
When turning the hand wheel left, the truck will turn left. The
rear wheels of the forklift truck are steering wheels, which
make the tail section of the truck swing out when turning. The
turning method can be mastered easily through practice.