Baoli CPCD 100, Operating And Servicing Manual

Page: 54 / 112

48
(2) Too higher oil temperature
Parts Problem Possible cause and remedy
Torque
converter
1. Lower oil level Check oil level and add oil.
2. Blocked oil filter Check, clean or replace.
3. Fly wheel bump against other
parts.
Check oil, if have dirt, replace it.
4. Air entering in resulting
from loose connectors.
Check connectors or oil pipes.
Retighten each connector or
replace seals.
5. Water mixed into oil Check and replace oil.
6. Low oil flow Check pipes and replace.
7. Worn bearing Check and replace.
Gear
box
1. Slipped clutch Replace friction piece of clutch.
2. Worn bearing Check and replace.
(3) Noisy gear box
Parts Problem Possible cause and remedy
Torque
converter
1. Elasticity plate is broken. Check noise and replace elasticity plate.
2. Damaged or worn bearing. Check or replace
3. Gear is broken. Check or replace
4. Spline is worn Check or replace
5. Noisy main pump Check or replace
6. Loosen bolt Check, tighten or replace
Gear
box
1. Bearing is worn Check or replace
2. Gear is broken Check or replace
3. Spline is worn Check or replace
4. Loosen bolt Check, tighten or replace