User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
number
character
secondary menu
2.50K
5.00K
6.25K
10.00K
12.50K
20.00K
25.00K
1 STEP Stepped
frequency
50.00K
In frequency mode, change step value of
frequency by pressing
S
/
T
key.
HIGH
High power transmitting
2 TXP
Transmitting
power
LOW
Low power transmitting
OFF
Deactivate the power saving mode
1
Power saving in 1:1 way
2
Power saving in 1:2 way
3
Power saving in 1:3 way
3
SAVE
Power saving mode
4
Power saving in 1:4 way
OFF
Deactivate voice-operated transmitting;
when voice-operated transmitting is
activated, transmitting can be executed just
by shouts without pressing PTT key.
4 VOX
Voice-operated
transmitting
1,2,…,10
Sound pressure level for activating of
voice-operated transmitting
OFF
Deactivate automatic backlight
6
ABR
Automatic
backlight
ON
Activate automatic backlight
OFF
Deactivate dual-frequency waiting
7 TDR
Dual-frequency
waiting
ON
Activate dual-frequency waiting
OFF
Deactivate operation prompt tone
8
BEEP
Prompt tone switch
ON
Activate operation prompt tone
9 TOT
Time-out
time
15,20,…,600
The number is in a range from 15 to 495
and increases in step of 15, indicating the
maximum transmitting time after pressing
PTT key.
OFF
Deactivate prompt language
10 VOICE Prompt
language
ON
Activate prompt language
TO
Time scanning mode means continuing the
scanning 5 seconds after finding the signal
CO
Carrier scanning mode means continuing
the scanning after the signal that is found
disappears
11 SC-REV
Scanning recovery
mode
SE
Search scanning mode means stopping
scanning after finding the signal
12
ANI-ID
Inquiry of ID of this
two-way radio
Used for inquire the ID code set in this
two-way radio (The ID code can only be
written via frequency writing software) .
FREQ
In segment A channel mode, the channel is
displayed by way of frequency.
CH
In segment A channel mode, the channel is
displayed by way of channel number.
13 MDF-A
A channel display
mode
NAME
In segment A channel mode, the channel is
displayed by way of channel name
(Specific name is set in frequency writing
software)
FREQ
In segment B channel mode, the channel is
displayed by way of frequency.
CH
In segment B channel mode, the channel is
displayed by way of frequency.
14 MDF-B
B channel display
mode
NAME
In segment B channel mode, the channel is
