User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
10.3) By pressing [
S
] key or [
T
] key, select forward or backward the idle channel, and the screen shows
.
10.4) By pressing [MENU] key, voice prompt "receiving storage" is issued, and the screen shows
.
10.5) By pressing [EXIT] key, return to frequency mode.
10.6) Execute Step 4) , enter desired transmitting frequency;
10.7) By pressing [MENU]
→
27, the screen shows
,
10.8) By pressing [MENU] key, voice prompt "store channel" is issued, and the screen shows
,
10.9) By pressing [MENU] key, voice prompt "transmitting storage" is issued, and the screen shows
;
10.10) By pressing [EXIT] key, return to frequency mode.
◆
CTCSS scanning
Before setting CTCSS scanning, set the receiving frequency, ensure that signals can be received at such receiving frequency, and
meanwhile cancel dual-frequency waiting function, as well as make the two-way radio operate in frequency mode.
1) DCS scanning
1.1) Enter correct receiving frequency via the numeric keys.
1.2) By pressing [MENU] key, enter function menu setting after voice prompt "menu setting" is issued;
1.3) By pressing [
S
] key or [
T
] key, select forward or backward the Menu 10; or enter number 10 directly to enter Menu 10, the
screen shows
.
1.4) By pressing [MENU] key, voice prompt "DCS" is issued; by pressing [*/SCAN] key, the screen shows
.
·DCS sign flashing represents that the two-way radio has enter DCS scanning state; the numbers of the DCS will not move when
there isn't signal;
·After receiving signals, the numbers of the DCS move rapidly in turn according to sequence of standard CTCSS. When the two-way
radio finds that the CTCSS in the receiving signals is consistent with one group standard DCS, the two-way radio will issue a "beep"
prompt tone, and scanning stops.
·If you want to store this CTCSS scanned, press [MENU] key to store it, otherwise press [EXIT] key to exit.
2) CTCSS scanning.
2.1) Enter correct receiving frequency via the numeric keys
2.2) By pressing [MENU] key, enter function menu setting after voice prompt "menu setting" is issued
2.3) By pressing [
S
] key or [
T
] key, select forward or backward the Menu 11; or enter number 11 directly to enter Menu 11, the
screen shows
.
2.4) By pressing [MENU] key, voice prompt " CTCSS " is issued; by pressing [*/SCAN] key, the screen shows
.
