User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
12.3) Press [
S
] key or [
T
] key to select forward or backward Channel 001 (or idle channel) .
12.4) Then press [MENU] key to confirm channel storage, and now CH-001 is displayed at the position of channel number.
By the above settings, press [FVO/MR] key to switch to channel mode, enter 1 directly, and now you can find that there are
channel parameters on channel number 001. You can also decide the display mode of channel parameters via Menu 13 and Menu 14.
Menu 13 decides the channel display mode of uplink channel; Menu 14 decides the channel display mode of downlink channel.
·FREQ means frequency mode;
·CH means channel mode;
·NAME means channel number and channel name and mode.
Menu operation
■
What is menu?
For this two-way radio, many functions can be selected and configured via menu controlled by software rather than physical control
components of the two-way radio. Once you become familiar with the menu system, its various functions will make you feel
convenient. You can customize various setting and programming functions for this two-way radio as needed to avoid frequent use of
keys, control buttons and switches.
■
Access to menu and menu operation (operation in standby mode)
1) Press [MENU] key to enter function menu setting, "menu setting" voice prompt is issued, and the screen shows
.
·The display screen shows simple menu description and setting and menu number.
2) Press [
S
] key or [
T
] key to select forward (rising prompt tune) or backward (falling prompt tune) the desired menu number, or
enter into the desired menu number by or entering a number according to the sequence number of the menu.
·When changing menu number, the display screen will show a short description of each menu and current parameters.
3) Enter menu content setting by pressing [MENU] key, simple voice prompt (such as stepped frequency) is issued, the screen shows
, the pointer on the left points down to prompt that there is options to be selected.
4) Press [
S
] key or [
T
] key to select forward or backward the desired parameters;
5) Confirm by pressing [MENU] key, voice prompt "confirm" is issued, save and return to previous menu;
6) Cancel the save action and exit from the menu mode by pressing [EXIT] key, return to main interface.
■
Rapid menu search function
After entering into menu selection or function parameter selection under menu items by pressing [MENU] key, search upward or
downward the menu and various parameters by pressing [
S
] key or [
T
] key once, or search rapidly upward or downward by
pressing and holding the [
S
] key or [
T
] key.
Setting of following menu items are unavailable in channel mode: CTCSS, DCS, wideband/narrowband, BCL, scan channel
adding, signaling code and channel name. In current channel mode, high/low power can be switched rapidly via [
#/
] key only.
