2.
Press
【
】
/
【
】
to set, then press
【
MENU
】
to select.
3.
Press
【
】
/
【
】
to the radio setting, then press
【
MENU
】
to select.
4.
Press
【
】
/
【
】
to the radio number, then press
【
MENU
】
to select.
5.
The screen shows the radio ID and name.
Check radio version
Check and indicate this radio’s firmware version, CPS version information.
The menu functions as follows:
1.
Press
【
MENU
】
to enter menu mode.
2.
Press
【
】
/
【
】
to set, then press
【
MENU
】
to select.
3.
Press
【
】
/
【
】
to the radio information, then press
【
MENU
】
to select.
4.
Press
【
】
/
【
】
to the radio version, then press
【
MENU
】
to select.
5.
The screen shows the current firmware version, CPS version.
Radio configuration
The radio configuration is mainly to edit the channel content.
Configure paths: enter the Settings -> radio configuration menu, and select the corresponding configuration items
to configure.
Receiving frequency
The menu functions as follows:
1.
Press
【
MENU
】
to enter menu mode.
2.
Press
【
】
/
【
】
to set, then press
【
MENU
】
to select.
3.
Press
【
】
/
【
】
to the radio configuration, then press
【
MENU
】
to select.
4.
Use the keyboard to type the correct radio configuration password (software Settings), then press
【
MENU
】
to
select.
5.
Press
【
】
/
【
】
to receiving frequency, then press
【
MENU
】
to select.
6.
The screen shows the receiving frequency of the current channel, then press
【
MENU
】
to select.
7.
Press the keyboard to type the corresponding number, press
【
】
to delete the last number, press
【
BACK
】
to
return to the previous menu.
8.
After the changes, press
【
MENU
】
, the screen shows that the receiving frequency has been saved.
Note
: According to frequency range of software limit frequency changes when editing and changing frequency, if
less than the frequency range of software, then the final change results will be the minimum value settings on the
software, the opposite is maximum.
Transmitting frequency
The menu functions as follows:
1.
Press
【
MENU
】
to enter menu mode.
2.
Press
【
】
/
【
】
to set, then press
【
MENU
】
to select.
3.
Press
【
】
/
【
】
to the radio configuration, then press
【
MENU
】
to select.
4.
Use the keyboard to type the correct radio configuration password (software Settings), then press
【
MENU
】
to
select.
5.
Press
【
】
/
【
】
to transmitting frequency, then press
【
MENU
】
to select.
6.
The screen shows the transmitting frequency of the current channel, then press
【
MENU
】
to select.
7.
Press the keyboard to type the corresponding number, press
【
】
to delete the last number, press
【
BACK
】
to
return to the previous menu.