★
VFO frequency mode frequency setting
In frequency mode, long press
【
BACK
】
key on the standby interface, V on the right side of the screen means
that it is in manual input frequency mode. You can manually input the frequency and specify a certain frequency
to transmit.
• Select via menu
Set the path: "Menu-> Settings-> Walkie talkie Settings-> Mode-> Frequency Mode" and then press the [MENU]
key to set the frequency mode.
• Frequency selecting
In addition to press
【
】
or
【
】
key, you can also choose to directly enter the frequency. If the required
operating frequency is far away from the current frequency, you can use the keyboard to enter the frequency
directly. Press the numeric keys ([0] to [9]) to enter the desired frequency (MHZ for the first three digits of the
decimal point and KHZ for the fifth digit after the decimal point).
Write frequency software configuration path: open the write software -> Edit -> VFO mode -> VFO A ->
digital / analog data -> channel mode -> select "number."
• Or set VFO B to Analog. Normally set VFO A to digital mode and VFO B to analog mode.
★
Single / dual band mode switch
When the radio is standby, press
【
】
/
【
】
key to switch the primary and secondary channels.
1. The black pointer
points to the primary channel and is the digital channel; the other channel is the
secondary channel.
• If the black pointer
points to the primary channel and indicates that the channel is an analog channel;
the other channel is the secondary channel.
2. Press
【
BACK
】
to switch to dual band single standby or dual band dual standby
-channel is displayed
, it indicates that the product is working in the mode of “dual
band single standby ", and the sub-channel does not receive the signal at this time.
Note: The ARTS Auxiliary function does not work because the dual keep mode is in the primary and secondary
channel scanning status, DTMF, auto-scan and work alone.
★
Select channel, user ID, group call ID
After power on, if you have more than one region in the radio, select the desired region and turn the Channel
knob to select the desired channel, user alias or ID, or the group alias or ID.
★
Receive and reply group calls
To receive a call from a user group, the transceiver must be configured to belong to the talk group.
When receiving a group call:
1. LED indicator light is green.
2. The top line of the screen displays status icons such as RSSI. In the display area below the top line: The first line
shows the group alias for the talk group, the middle shows the caller ID, and the bottom shows the group call icon
(digital only).
3. Hold the walkie talkie in its upright position and at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth
4. Press
【
PTT
】
key to reply the call, LED indicator light is red.
5. Release the [PTT] key to answer.
6. If there is no voice activity for the scheduled time period, the call is terminated.
If the walkie talkie receives a group call and is not at home at this time, it remains on the current screen