+
-
+
-
+
-
+
-
+
-
+
-
Temperature
sensor port
Individual cell
connector port
DEC/INC
To select sub program
To alter the value
TYPE/STOP
To select main program
To stop the operation
Charging lead
connector
ENTER/START
To resume or start the operation
LCD screen
(16chr.x2 lines)
Input power cable
(DC11~18V)
Exterior of the unit
Temperature limit(*) : The temperature of the battery on charging will rise by its
internal chemical reaction. If you set the limit of temperature the process will be expired
forcibly when the limit has been reached.
Processing time limit : You can also restrain the maximum processing time to prevent
from any possible defect.
Input power monitor : To protect the car battery using as input power from being
damaged, its voltage always being monitored. If it drops below the lower limit the
process will be ended automatically.
- Data store/load
For users convenience, it can store maximum 10 data of different batteries. You can
establish the data contains program setting of the battery to charge or discharge.
These data can be called back at any time you need and the process can be executed
without program setting.
- PC based analysis using USB communication(**)
For technical expert, BC6HP offers PC based program can analysis the characteristic
of the battery by USB port. It shows a graph of voltage, current, capacity and
temperature curves. It also shows the individual voltage of each cell in the Lithium
battery pack.
* When using the optional thermal probe (part no. EAC110)
** When the software which can be downloaded at our web page, is installed at PC using with
separately purchased USB cable kit (part no. EAC400)
USB port
- 3 -
+
-
+
-
+
-
+
-
+
-
+
-
-
+
-
+
-
-
+
-
+
-
+
-
+
-
Cooling fan
!
!
!
