+
-
+
-
+
-
+
-
+
-
+
-
Display
NiMH[0] CYCLE
DCHG>CHG 3
Display
Cycle (C>D, D>C) mode NiMH/NiCd battery
Set the sequence on the left and the number of
cycle on the right. You can use this function for
balancing, refreshing and break-in the battery. To
avoid rising temperature of the battery, there will a
brief cool-off period that already fixed at 'User
program setup' after each charge and discharge
process.
The cycle program uses the charge current,
discharge current and discharge cut-off voltage
which are set on previous programs-’charge’ and
‘discharge’.
The cycling number ranges from 1 to 5.
Display
DCHG 1 1314mAh
CHG 1 1430mAh
At the end of the process, you can see charged or
discharged electric capacities of the battery at each
cyclic process.
By pressing ‘INC’ or ‘DEC’ button, the screen shows
the charged or discharged capacity of each cycle in
order.
NiMH 2.0A 7.42V
D>C 022:45 00890
+
-
+
-
ENTER
START
TYPE
STOP
DEC
INC
DEC
INC
battery
voltage
discharge
or charge
current
discharged
or charged
capacity
elapsed
time
battery
type
- 15 -
+
-
+
-
+
-
+
-
+
-
+
-
-
+
-
+
-
-
+
-
+
-
+
-
+
-
!
!
!
Display
NiMH[0] REFLEX
3.0A 1200mAh
Display
Reflex charge NiMH/NiCd battery
The battery will be charged using the pulsed current
which is very brief and high-rate discharge pulses.
This will help to prevent from undesired side effect
like ‘memory effect’. When you select this mode, you
need to set the partial capacity which will be charged
with reflex mode. The charger will work with ‘Reflex’
mode only until the capacity has been charged, then
the charger will work at ‘Normal mode’.
- Set the charge current on the left and the partial
capacity on the right. The partial capacity should be
less than the total capacity of battery.
- Press and hold ‘ENTER/START’ button for more
than 3 seconds to start the process.
NiMH 3.0A 7.42V
REX 012:45 00890
+
-
+
-
ENTER
START
TYPE
STOP
DEC
INC
DEC
INC
battery
voltage
charge
current
charged
capacity
elapsed
time
battery
type
