3. To exit Test Mode, press the SMART-TEACH push button once.
NOTE: By default, the barcode scanner automatically exits Test Mode after two minutes.
Advanced Scanner Configuration
The Advanced selection is available when starting the GeniusPlus application and is designed for expert users to complete
a more detailed scanner configuration. By choosing this option it is possible to start a new scanner configuration or to open
and modify an old one. Refer to TCNM - AD/EX/SP Family Software Configuration Parameter Guide for more information.
Programming and Layout Notes
Host Mode Programming. The scanner can also be configured from a host computer using the Host Mode programming
procedure and commands via the serial interface. See the Host Mode Programming file on the CD.
Alternative Layouts
•
The ID-NET
™
network is a built-in speed interface dedicated for high-speed scanner interconnection. ID-NET is in
addition to the Main and Auxiliary serial interfaces. If you need an ID-NET network, refer to the TCNM-AD/EX
manual. The scanner can also be configured for alternative layouts by reading programming barcodes. See Family
Scanner Setup Procedure Using Programming Barcodes, printable from the CD.
•
If you need to install an Ethernet network, Fieldbus network, Pass-Through network, Multiplexer network, or an
RS-232 Master/Slave network, refer to the TCNM-AD/EX manual.
Appendix
TCNM-AD Barcode Scanner
P/N 175718 Rev. A
www.bannerengineering.com - tel: 763-544-3164
11
