Banner T30RW, Instruction Manual

Page: 23 / 43

June 23, 2023
T30RW R-GAGE Washdown Radar Sensor Instruction Manual
23
Analog Teach Modes
The default is to teach two separate points. With a positive slope, the first taught point is 4 mA and the second taught point is
20 mA.
If the two taught points are within 100 mm or less, the sensor views them as the same point. It considers that point as the 20
mA spot and sets the 4 mA spot at 300 mm. If a taught point is within the dead zone, the sensor sets that point at 300 mm.
Discrete Teach Modes
Teaching two separate points creates a window around that range.
Background Teach—Teaching the same point twice (points within 100 mm of each other) sets the switch point 200 mm in
front of the taught point.
Object Teach—Teaching the same point twice (points within 100 mm of each other) sets the switch point 100 mm behind the
taught point.
Window Teach—Teaching the same point twice (points within 100 mm of each other) sets a window ±50 mm on either side of
the taught point, for a total window size of 100 mm.
Set the Sensitivity
Use Sensitivity Selection to set the signal strength threshold.
Access Sensitivity Selection.
Action Result
Triple-pulse the remote input.
T T
T
T
T
The green power LED flashes slowly.
1.
Select the desired signal threshold.
Action
Result
Pulses TEACH Mode
1
T
Signal Strength Threshold = 1
The signal threshold is set and the
green power LED flashes equal to
the number of pluses, pauses, and
then flashes equal to the number of
pulses a second time. Then the
sensor exits remote teach and
returns to run mode.
2
T T
T
Signal Strength Threshold = 2
3
T T
T
T
T
Signal Strength Threshold = 3
4
T T
T T T
T T
Signal Strength Threshold = 5
5
T T
T
T
T
T
T
T
T
Signal Strength Threshold = 10
6
T T
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 15
7
T T
T
T
T
T
T
T
T
T
T
T
T
Signal Strength Threshold = 20
Continued on page 24
2.
© Banner Engineering Corp.