Banner Sure Cross DXM100-B Series Page 53 Instruction Manual Download

Page: 53 / 121

8.3 Register Flow and Configuration

The DXM register data flow goes through the Local Registers, which are data storage elements that reside within the

processor. Using the DXM Configuration Software, the controller can be programmed to move register data from the Local

Figure 30. Register flow

Remote Devices

Ethernet/USB/Cellular

Processor

Local

Registers

Display

I/O Base

Internal

Radio

8.3.1 Basic Approach to Configuration

When programming an application in the DXM, first plan the overall data structure of the Local Registers. The Local

Registers are the main storage elements in the DXM. Everything goes into or out of the Local Registers.

1. In the DXM Configuration Software, name the Local Registers to provide the beginning structure of the application.
2. Configure the read/write rules to move the data. The Read/Write rules are simple rules that move data between

devices (Nodes, Modbus slaves, sensors, etc) and the Local Registers.

3. Most applications require the ability to manipulate the Local Register data, not just move data around. Use the

Action

rules

to make decisions or transform the data after the data is in the Local Registers. Action rules can apply many

different functions to the Local Register data, including conditional statements, math operations, copy operations, or
trending.

4. To perform scheduled events in Local Registers, go to the

Scheduler

screen in the DXM Configuration Software.

These rules provide the ability to create register events by days of the week. The scheduler can also create events
based on sunrise or sunset.

8.3.2 Troubleshooting a Configuration

View Local Registers using the

Local Registers

Local Registers in Use

screen of the DXM Configuration Software.

When a configuration is running on the DXM, viewing the Local Registers can help you to understand the application's

operation. This utility can also access data from remote devices.
To configure the Local Register data to display on the LCD menu, go to the

Local Registers

screen, set the

LCD

permissions

to read or read/write.

8.3.3 Saving and Loading Configuration Files

The DXM Configuration Software saves its configuration information in a XML file. Use the

File

menu to Save or Load

configuration files.
Save the configuration file before attempting to upload the configuration to the DXM. The DXM Configuration Software

uploads the configuration file saved on the PC to the DXM; it will not send the configuration loaded in the tool.

Sure Cross

DXM100-Bx and DXM1000-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for Sure Cross DXM100-B Series

























































































































Search results

Summary of Contents for Sure Cross DXM100-B Series

Reviews:

Related manuals for Sure Cross DXM100-B Series

Brands by name

Popular brands

Banner Sure Cross DXM100-B Series, Instruction Manual

Search results

Summary of Contents for Sure Cross DXM100-B Series

Reviews:

Related manuals for Sure Cross DXM100-B Series

Brands by name

Popular brands