Banner Sure Cross DXM100-B Series Instruction Manual Download Page 52

Page: 52 / 121

8 Configuration Instructions

8.1 DXM Configuration Software

Download the latest version of all configuration software from

http://www.bannerengineering.com

. For more information on

using the DXM Configuration Software, refer to the instruction manual (p/n

209933

Figure 28. Overview of the configuration software features

USB
Ethernet

DXM Configuration Software

Local Registers

View Utility

System

Settings

Scheduler

Action Rules

Script Basic

XML Config File

The configuration software configures the DXM by creating an XML file that is transferred to the DXM using a USB or

Ethernet connection. The DXM can also receive the XML configuration file from a Web server using a cellular or Ethernet

connection.
This configuration file governs all aspects of the DXM operation.
The wireless network devices are a separate configurable system. Use the DX80 User Configuration Software to configure

the internal DX80 wireless Gateway and the attached wireless Nodes. Use the MultiHop Configuration Software if the internal

radio is a MultiHop device.
All tools can be connected to the DXM using a USB cable or an Ethernet connection.

8.2 Save and Upload the Configuration File

After making any changes to the configuration, you must save the configuration files to your computer, then upload it to the

device.
Changes to the XML file are not automatically saved. Save your configuration file before exiting the tool and before sending

the XML file to the device to avoid losing data. If you select

DXM

Send XML Configuration to DXM

before saving the

configuration file, the software will prompt you to choose between saving the file or continuing without saving the file.

1. Save the XML configuration file to your hard drive by going to the

File

Save As

menu.

2. Go to the

DXM

Send XML Configuration to DXM

menu.

Figure 29. Status indicator bar

•

If the Application Status indicator is red, close and restart the DXM Configuration Tool, unplug and re-plug in the

cable and reconnect the DXM to the software.

•

If the Application Status indicator is green, the file upload is complete.

•

If the Application Status indicator is yellow, the file transfer is in progress.

The device reboots and begins running the new configuration.

Sure Cross

DXM100-Bx and DXM1000-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for Sure Cross DXM100-B Series

























































































































Search results

Summary of Contents for Sure Cross DXM100-B Series

Reviews:

Brands by name

Popular brands

Banner Sure Cross DXM100-B Series, Instruction Manual

Search results

Summary of Contents for Sure Cross DXM100-B Series

Reviews:

Brands by name

Popular brands