To order a cascade system, see
on page 15:
1. Determine the configuration of the first sensor pair (a stand-alone or the "Master" is connected to the machine
control).
2. Determine the model from the applicable model number table. Model numbers listed in the tables are RD
connection style model numbers. Add a P5 (or P55) or a P8 (or P88) at the end of the listed model number for a
sensor with a 300 mm (1 ft) pigtail M12/Euro-style QD.
3. Determine the remaining sensor pairs (slaves), which will be an RD connection style that uses a DELS-11xxE
interconnection cordset.
See tables for model number:
Resolution
See Table 10.1.2.4: 14 mm
See Table 10.1.2.5: 23 mm
See Table 10.1.2.6: 40 mm
Connection Style
Cordset Options (10.2.1):
See tables for model number:
Resolution
Connection Style
See tables for model number:
Resolution
Connection Style
Interfacing Options*:
Cordset Options (10.2.1):
Interfacing Options:
Cordset Options (10.2.1):
Interfacing Options:
See tables for model number:
Resolution
Connection Style
Resolution
Cordset Options (10.2.1):
RD-to-RD cordset see:
DELS-11xxE
5-Pin Pigtail QD
Sensor Pair #1 (Master/Machine Control)
Sensor Pair #2,
#3, and #4
(Slaves)
Removable Disconnect (RD)
8-Pin Pigtail QD
Add the following suffix to
order a 5-pin pigtail QD:
P5 = Individual sensor
P55 = Pair
P8 = Individual sensor
P88 = Pair
Add the following suffix to
order an 8-pin pigtail QD:
The model numbers listed
in these tables have RD
connections.
The model numbers listed
in these tables have RD
connections.
If a stand-alone (standard)
pair is to be used as as the
end sensor pair, see tables:
See Table 10.1.2.1: 14 mm
See Table 10.1.2.2: 23 mm
See Table 10.1.2.3: 40 mm
Connection Style
The model numbers listed
in these tables have RD
connections.
5-pin cordsets see:
Single-ended QDE-5..D
Double-ended DEE2R-5..D
8-pin cordsets see:
Single-ended QDE-8..D
Double-ended DEE2R-8..D
8-pin cordsets see:
Single-ended RDLS-8..D
300 mm Pigtail DELSE-8..D
UM-FA-..A (10.2.2)
XS/SC26-2.. (10.2.3)
SC22-3.. (10.2.3)
MMD-TA-..B (10.2.4)
Alternate options:
IM-T-9A/-11A (10.2.5)
Contactors (10.2.6)
UM-FA-..A (10.2.2)
XS/SC26-2.. (10.2.3)
SC22-3.. (10.2.3)
MMD-TA-..B (10.2.4)
Alternate options:
IM-T-9A/-11A (10.2.5)
Contactors (10.2.6)
UM-FA-..A (10.2.2)
XS/SC26-2.. (10.2.3)
SC22-3.. (10.2.3)
MMD-TA-..B (10.2.4)
Cordsets for optional features,
see:
EZ-LIGHT options: DELSEF-4..D
E-Stop/Interlock: RDLS-8..D
Remote Fix Blank: DELSEF-81D
General accessories (including): See Accessories (10.2)
Mounting brackets (10.2.7),
Splitter Cordsets (10.2.1)
EZ-LIGHT Indicators (10.2.12)
Stands (10.2.15)
Lens shield (10.2.10)
Alignment Aids (10.2.9)
Mirrors (10.2.13)
* 5-pin models must be interfaced with a self-checking safety module, safety controller, or safety PLC/PES that conforms
to the level of performance required by the risk assessment (such as Control Reliability and/or ISO13849-1 Categories 3 or 4 and PL d or e).
See Table 10.1.2.4: 14 mm
See Table 10.1.2.5: 23 mm
See Table 10.1.2.6: 40 mm
See Table 10.1.2.4: 14 mm
See Table 10.1.2.5: 23 mm
See Table 10.1.2.6: 40 mm
See Table 10.1.2.4: 14 mm
See Table 10.1.2.5: 23 mm
See Table 10.1.2.6: 40 mm
Figure 4. Ordering guide for cascading systems
EZ-SCREEN
®
LS Safety Light Screen
www.bannerengineering.com - Tel: +1.763.544.3164
15
