5 Specifications
Sensing Beam
Visible red, Class 2 laser, 650 nm
Supply Voltage (Vcc)
10 to 30 V dc (Class 2 supply) (10% max ripple within limits)
Power and Current Consumption, exclusive of load
< 1 W
Sensing Range
95 mm to 2000 mm (3.74 in to 78.74 in)
Output Configuration
Channel 1: IO-Link, Push/pull output, configurable PNP or NPN output
Channel 2: Multi-function remote input/output, configurable PNP or
NPN, or pulse frequency modulated output
Output Rating
Current rating: 50 mA maximum
Black wire specifications per configuration
IO-Link Push/Pull
Output High:
≥ Vsupply - 2.5 V
Output Low:
≤ 2.5V
PNP
Output High:
≥ Vsupply - 2.5 V
Output Low:
≤ 1V (loads ≤ 1 MegΩ)
NPN
Output High:
≥ Vsupply - 2.5 V (loads ≤ 50 kΩ)
Output Low:
≤ 2.5 V
White wire specifications per configuration
PNP
Output High:
≥ Vsupply - 2.5 V
Output Low:
≤ 2.5 V (loads ≤ 70 kΩ)
NPN
Output High:
≥ Vsupply - 2.5 V (loads ≤ 70 kΩ)
Output Low:
≤ 2.5 V
Response Speed
User selectable: 3, 5, 15, 25, or 50 ms
Delay at Power Up
< 2.5 s
Maximum Torque
Side mounting: 1 N·m (9 in·lbs)
Ambient Light Immunity
Up to 5000 lux at 1000 mm
Up to 2000 lux at 2000 mm
Connector
Integral 4-pin M12/Euro-style quick disconnect
Construction
Housing: ABS
Lens cover: PMMA acrylic
Lightpipe and display window: polycarbonate
Temperature Effect (Typical)
< 0.5 mm/°C at < 500 mm
< 1.0 mm/°C at < 1000 mm
< 2.0 mm/°C at < 2000 mm
Discrete Output Distance Repeatability
Distance (mm)
Repeatability
95 to 300
± 0.5 mm
300 to 1000
± 0.25%
1000 to 2000
± 0.5%
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Remote Input
Allowable Input Voltage Range: 0 to Vsupply
Active High (internal weak pull-down): High state > (Vsupply – 2.25 V) at
2 mA maximum
Active Low (internal weak pull-up): Low state < 2.25 V at 2 mA
maximum
Beam Spot Size
Distance (mm)
Size (x × y) (mm)
100
2.6 × 1.5
1000
4.2 × 2.5
2000
6 × 3.6
Beam spot size is calculated as 1.6 times the D4
σ
measured value
IO-Link Interface
Supports Smart Sensor Profile: Yes
Baud Rate: 38400 bps
Process Data Widths: 16 bits
IODD files: Provides all programming options of the display, plus
additional functionality.
Application Note
For optimum performance, allow 10 minutes for the sensor to warm up
Environmental Rating
IEC IP67 per IEC60529
Vibration
MIL-STD-202G, Method 201A (Vibration: 10 Hz to 60 Hz, 0.06 inch (1.52
mm) double amplitude, 2 hours each along X, Y and Z axes), with unit
operating
Q5X Laser Triangulation Sensor with Background Suppression
30
www.bannerengineering.com - Tel: +1.763.544.3164
