7.4.4 Potential DXM Issues
Potential issues with the DXMR90-4K are collected from Banner's support engineers to provide solutions. Users can get help
from the website documentation or by calling Banner Engineering for support help. Solutions are as simple as configuration
adjustments, work-around configuration solutions, or potential new firmware updates.
7.4.5 DXM Security
The DXMR90-4K was designed to collect local wireless sensor data, local sensor data, provide simple control, and send the
data to the cloud.
The DXMR90-4K does not run a Linux or Windows based operating system but an embedded real-time operating system
(RTOS) environment. As a proprietary operating system, the security aspects are easier to manage and minimize.
Security updates are released through the Banner Engineering Corp website (
) and New
Product Release Announcements (
7.5 Contact Us
Banner Engineering Corp. headquarters is located at:
9714 Tenth Avenue North
Minneapolis, MN 55441, USA
Phone: + 1 888 373 6767
For worldwide locations and local representatives, visit
.
7.6 Warnings
Install and properly ground a qualified surge suppressor when installing a remote antenna system.
Remote antenna
configurations installed without surge suppressors invalidate the manufacturer's warranty. Keep the ground wire as short as
possible and make all ground connections to a single-point ground system to ensure no ground loops are created. No surge
suppressor can absorb all lightning strikes; do not touch the Sure Cross
®
device or any equipment connected to the Sure
Cross device during a thunderstorm.
Exporting Sure Cross
®
Radios.
It is our intent to fully comply with all national and regional regulations regarding radio
frequency emissions.
Customers who want to re-export this product to a country other than that to which it was sold
must ensure the device is approved in the destination country.
The Sure Cross wireless products were certified for use
in these countries using the antenna that ships with the product. When using other antennas, verify you are not exceeding
the transmit power levels allowed by local governing agencies. This device has been designed to operate with the antennas
listed on Banner Engineering’s website and having a maximum gain of 9 dBm. Antennas not included in this list or having a
gain greater that 9 dBm are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To
reduce potential radio interference to other users, the antenna type and its gain should be so chosen such that the equivalent
isotropically radiated power (EIRP) is not more than that permitted for successful communication. Consult with Banner
Engineering Corp. if the destination country is not on this list.
Important:
Please download the complete DXMR90-4K IO-Link Master technical documentation, available
in multiple languages, from www.bannerengineering.com for details on the proper use, applications,
Warnings, and installation instructions of this device.
Important:
Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los
DXMR90-4K IO-Link Master, disponibles en múltiples idiomas, para detalles del uso adecuado,
aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
Important:
Veuillez télécharger la documentation technique complète des DXMR90-4K IO-Link Master sur
notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les
notes de sécurité et les instructions de montage.
WARNING:
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
DXMR90-4K IO-Link Master
www.bannerengineering.com - Tel: + 1 888 373 6767
29
