Jumper
Function
Positions
E
Courtesy power output
Jumper 2 is the power jumper for pin 45. Jumper 1 is the power jumper for pin 35.
•
The pin 45 jumper selects 2.7 V when in the "a" position and 12 V battery in the
"b" position.
•
The pin 35 jumper selects 4.2 V when in the "a" position and device power on
pin 2 in the "b" position.
G1
Not Used
Not Used
G2
Not Used
Not Used
G3
Analog output characteristics
for AO2 (pin 32) and AO1 (pin
33)
Defines current (0–20 mA) or voltage (0–10 V) for analog output 1 and 2.
By default, current (0–20 mA) is selected using jumpers 1 and 2 and registers 4008 and
4028 contain a value of 2.
To select voltage (0–10 V) for output Aout1, set jumper 1 in the voltage position (V) and
set Modbus register 4008 on the I/O board to 3.
To select voltage (0–10 V) for output Aout2, set jumper 2 in the voltage position (V) and
set Modbus register 4028 on the I/O board to 3.
DXM150-Sx Wireless Modbus Slave
22
www.bannerengineering.com - Tel: +1.763.544.3164
