Specifications
Required Fiber Optics
PFCVA models (Custom fiber arrays and mounting configurations are
possible. Consult factory for assistance with your small object counting
application.)
Sensing Beam
Visible red, 680 nm
Output Configuration
2 NPN or 2 PNP, depending on model
Output Rating
150 mA maximum load
OFF-state leakage current: < 10 µA at 24 V dc
ON-state saturation voltage: NPN < 1.5 V at 150 mA load; PNP < 2.5 V
at 150 mA load
Output Response Time
Programmable, 150 µs, 225 µs, 300 µs
NOTE: < 1 second delay on power-up; outputs do not conduct during
this time.
Adjustments
Push-button or remote programming of threshold offset percentage,
light/dark operate, Dynamic Event Stretcher (DES), display, and
power/speed
Installation
35 mm DIN rail or included mounting bracket
Indicators
Four-digit digital display, 2 arrow icons, push-button lockout, Dynamic
Event Stretcher, light/dark operate selection, and 2 amber output LEDs
Certifications
Supply Voltage and Current
12 to 24 V dc (10% maximum ripple) at less than 65 mA, exclusive of
load
Supply Protection Circuitry
Protected against reverse polarity and transient voltage
Output Protection Circuitry
Protected against false pulse on power-up and continuous short-circuit
Construction
Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear
polycarbonate cover
Environmental Rating
NEMA 1, IEC IP50
Operating Conditions
Temperature: –20 to 55 °C (–4 to 131 °F)
Storage Temperature: –20 to 80 °C (–4 to +75 °F)
Max. Rel. Humidity: 90% at 50 °C (non-condensing)
Number of
Devices, Stacked
Ambient Temp
Rating
Load
Specification
3
55 °C
150 mA
7
50 °C
50 mA
10
45 °C
50 mA
Connections
PVC-jacketed 2 m or 9 m (6.5 ft or 30 ft) 6-wire integral cable or
integral 6-pin Pico-style quick-disconnect
D10D...Sensor Dimensions
61.3 mm
(2.42")
68.1 mm
(2.68")
10.5 ± 0.2 mm (typ.)
(0.41")
Mounting Bracket
(included)
35.9 mm
(1.41")
7.6 mm
0.30"
9.8 mm
(0.39")
D10 Expert Series - Small Object Counter
P/N 146132 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
9
