D10
Expert™ Discrete Output with Bargraph Display
Specifications
Standard Sensors
Models with Bussable Power
Sensing Beam
660 nm visible red or 525 nm visible green,
depending on model
660 nm visible red
Supply Voltage
10 to 30V dc (10% max. ripple) @ less than 45
mA exclusive of load
12 to 30V dc (10% max. ripple) @ less than 45 mA
exclusive of load
Supply Protection Circuitry
Protected against reverse polarity, over voltage, and transient voltages
Delay at Power Up
200 milliseconds max.; outputs do not conduct
during this time
850 milliseconds max.; outputs do not conduct during this
time
Output Configuration
Bipolar; 1 current sourcing (PNP) and 1 current
sinking (NPN)
Main units:
Bipolar; 1 current sourcing (PNP) and 1
current sinking (NPN)
Sub-units: 1 current sourcing (PNP) or 1 current sinking
(NPN) output, depending on model
Output Rating
150 mA max. load @ 25° C (derate 1 mA per °C
increase)
OFF-state leakage current:
< 5 µA at 30V dc
ON-state saturation voltage:
NPN:
< 200 mV @ 10 mA; 1V @ 150 mA load
PNP:
< 1V @ 10 mA; 1.5V @ 150 mA load
100 mA max. load (derate 1 mA per °C above 30° C)
OFF-state leakage current:
< 5 µA at 30V dc
ON-state saturation voltage:
NPN:
< 1.5V
PNP:
< 2V
Supply 15V or more:
up to 16 units with 100 mA outputs
Less than 15V supply (9 m cable):
up to 4 units with 100 mA outputs
up to 8 units with 50 mA outputs
Output Protection
Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
Output Response Time
500 microseconds (normal mode) or 200 microseconds (high-speed mode)
Repeatability
100 microseconds (normal mode) or 66 microseconds (high-speed mode)
Adjustments
2 push buttons and remote wire
•
Expert
-style configuration (Static and Dynamic TEACH, and Window SET)
• Manually adjust (+/–) sensitivity (from push buttons only)
• LO/DO, OFF-delay, and response speed configurable (from push buttons or remote wire)
• Push button lockout (from remote wire only)
Factory Default Settings:
Light Operate, Normal Speed, No Delay
Indicators
8-segment red bargraph:
Light-to-dark signal difference relative to taught condition (Window SET)
Sensing contrast (Static or Dynamic TEACH)
Green Status Indicators:
LO, DO, High Speed (HS), and OFF-Delay
Green LED: Power ON
Yellow LED: Output conducting
Construction
Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover
Environmental Rating
IEC IP50, NEMA 1
Connections
PVC-jacketed 2 m or 9 m (6.5' or 30') 6-wire
integral cable or integral 6-pin Pico-style quick-
disconnect
Main units:
PVC-jacketed 2 m or 9 m (6.5' or 30')
5-wire integral cable
Sub-units:
PVC-jacketed 2 m or 9 m (6.5' or 30')
2-wire integral cable
Operating Conditions
Temperature:
-10° to +55° C (+14° to 131° F)
Storage:
-20° to +85° C (-4° to +185° F)
Relative Humidity:
90% @ 55° C (non-condensing)
Certifications
(CE approval is pending for models with bussable power)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
