D10
Expert
™
– with Discrete Output and Bargraph Display
†
Advanced sensor for use with plastic fiber optics
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Models
Features
• Easy-to-read 8-segment light bar indicator for teach and signal strength readout, plus
indicators for continuous readout of operating status (user configuration)
• Easy-to-set automatic
Expert-style configuration options include Static and Dynamic
TEACH, and Window SET, plus manual adjustment for fine tuning
• Smart gain-control algorithm to maximize performance in low-contrast applications
• Fast 500-microsecond sensing response with improved crosstalk avoidance routine
(for two sensors) in Normal mode
• Selectable high-speed (HS) mode option for 200-microsecond response
• Extreme configuration flexibility via push buttons or a remote input wire
• Easy selection of Light/Dark Operate (LO/DO), 30 ms pulse stretcher (OFF-delay),
and response speed, via push buttons or a remote input wire
• Visible red (660 nm) or visible green (525 nm) sensing beam, depending on model
• Sleek, ultra-slim 10 mm housing, mounts to standard 35 mm DIN rail
• Models with bussable power provide simplified wiring of up to 16 sensors and feature
improved temperature compensation for side-by-side mounting
†
U.S. Patent(s) issued or pending
* 9 m (30') cables are available by adding suffix
“W/30”
to the model number of any cabled sensor (e.g.,
D10BFP W/30).
A model with a QD connector requires a mating cordset (see page 12).
NOTE: See page 10 for performance curves.
Model
Description
Cable*
Outputs
Red Beam
Green Beam
D10BFP
D10BFPG
Standard sensor
2 m (6.5') Cable
Bipolar NPN/PNP
D10BFPQ
D10BFPGQ
6-pin Pico-style QD
Models with Bussable Power
D10B5FP
—
Main unit
2 m (6.5') Cable
Bipolar NPN/PNP
D10B2PFP
—
Sub-unit
2 m (6.5') Cable
Single PNP
D10B2NFP
—
2 m (6.5') Cable
Single NPN
Standard Model
Stack of Models with Bussable Power Feature
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
