banks 61410 Owner'S Manual Download

Page: 11 / 76

97654 v.7

cause the iDash or its parts to become

projectiles. Also, be sure to check

installation precautions for your exact

vehicle model and year.
Make sure to install the iDash mount so

it does not come off or fall down. Clean

off any dirt and wax from the installation

location, and install securely.
Periodically check the iDash mount

installation and condition of the cradle.

PRECAUTIONS FOR USE IN VEHICLE

Use only the items that come with this

unit and the Banks products it was

designed to interface with. Use of non-

specified items can damage the vehicle

interior or result in a poor fit, creating the

risk of accident, malfunction, or fire.
Install the iDash where it is out of the

reach of small children. Failure to do so

can cause an injury to the child or others

due to mishandling of the iDash.
Do not install the iDash in a location

where it will be splashed by water or

subjected to large amounts of humidity,

dust, or oil smoke. This can increase

the risk of smoke, combustion, electric

shock, and accident.

PRECAUTIONS DURING USE

• To protect the Liquid Crystal Display

(LCD), avoid exposure to direct sunlight

while not in use. Using a car sunshade

or other means to block the sun is

recommended.
• Do not clean the iDash while power is

turned on. When wiping the LCD, use a

dry soft, micro-fiber cleaning cloth.
• Do not use a paper towel to clean the

screen.
• When transporting the iDash, make

sure that the LCD screen does not come

in contact with any foreign objects.

Precautions during use inside a motor

vehicle: Always be sure to use the

iDash in accordance with local rules and

regulations.

SAFETY PRECAUTIONS,

CONTINUED

Summary of Contents for 61410













































































Search results

Summary of Contents for 61410

Reviews:

Related manuals for 61410

Brands by name

Popular brands

banks 61410, Owner'S Manual

Search results

Summary of Contents for 61410

Reviews:

Related manuals for 61410

Brands by name

Popular brands