background image

12

With the Video Programming via

Teletext (VPT) function in the video

tape recorder, you can use Teletext

TV listings when you preset Avant for

recording of future programmes. You

can also preset a Timer recording

manually.

If PDC/VPS (Program Delivery Control/

Video Programming System) signals

are broadcast by the current channel,

you can make sure that the 

programme is recorded in full*, even

if the broadcast time is changed by

the broadcaster.

You can preset as many as eight

future recordings. You can also check

the status of all your pending 

recordings by bringing up a list on

the screen. 

You can, of course, start recording

the current programme immediately.

The video tape recorder will continue

recording until the tape runs out,

unless you give other instructions.

Record a programme

Preset a recording via Teletext TV

listings

You can preset a recording of a future 

programme from a Teletext TV listings page.

Press to call up Teletext on the

screen

Locate the Teletext TV listings

page, as described on page 8

Press to highlight the first 

programme name or start time

on the list

Press to move the cursor to the

programme you wish to record

Press at any time to exit the

process and return to Teletext

Press GO to select the 

programme. The cursor changes

to show the date, the channel

number and channel name, 

followed by ‘OK?‘

If this information is incorrect,

press 

s s

or 

tt

to move through

the information and 

or 

to

change the settings themselves

Press GO to store your preset

Timer recording. RECORD is

shown 

TEXT

RECORD

▲ ▼

ss tt

STOP

GO

ss tt

▲ ▼

GO

While the TV is on…

If PDC/VPS signals are not broadcast by the 

current channel, your recordings are then preset

by start and stop times, and will not adapt to

broadcast delays or extensions. You will see the

times at the top of the screen when you store a

programme to be recorded.

If you want to record more programmes, you can

continue to highlight listed programmes with the

cursor.

*NOTE! The PDC/VPS option on the 

V.Tape Basic

setup

menu must be set to 

On

for Avant to record

a delayed or extended broadcast. Please refer to

Set your video tape recorder preferences

on page

32 in the Reference book for information about

the V.Tape Basic Setup menu.

Summary of Contents for BeoVision Avant



















Reviews: