![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-7-mk-ii/beovision-7-mk-ii_service-manual_3738514039.webp)
Service mode 4.3
Adjustments
Select the ´ADJUSTMENTS´ line and press
GO
.
Move cursor press
m
,
p
Select new values pess
l
,
n
Store new values press
GO
SOUND
AVC ON/OFF
(default ON)
The AVC, Automatic Volume Control, ensure a constant sound level in the speakers
for any selected TV channel. The AVC compensates for the difference in the sound
modulation that might be on the different TV channels.
AVC ON
AVC is enabled
AVC OFF
AVC is disabled
WSS STATUS DETECT ON/ DETECT OFF/ BROADCAST ONLY (default DETECT ON)
The WSS, Wide Screen Signalling, is the signal that set the correct format on the
screen.
The signal is usually on DVD’s and may be supplied by the TV Broadcasters.
BROARDCAST ONLY
TV tuner signal only.
Detector is enabled for signals from the TV tuner.
The signal is applied by the broadcast company.
DETECT ON
All sources, f.ex. TV tuner, DVD and sources connected to the AV-sockets.
DETECT OFF
Detector disabled.
This mode may be used if the signal is of poor quality, which results in random
changing of picture format.
This situation might occur on TV tuner signals with poor signal to noise ratio.
ADJUSTMENTS
SOUND
:
AVC
ON
FORMAT:
WSS STATUS
DETECT ON
AUTO FORMAT ENABLED
FORMAT 4:3
OFF
Summary of Contents for BeoVision 7 MK II
