53
System modulator
If your link room is an audio setup, for
example, a BeoLink Active/Passive, and you
choose to set up a non-linkable TV in the
same room, you must set the system
modulator in the main room to ON. The
factory setting is AUTO, which must be used
if you use a linkable Bang & Olufsen TV.
To switch on the system modulator …
> Press
TV
to switch on the television.
> Press
MENU
to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press
GO
to bring up the OPTIONS menu.
CONNECTIONS is highlighted already.
> Press
GO
to bring up the CONNECTIONS menu
and press to highlight LINK.
> Press
GO
to bring up the LINK menu, and press
to highlight MODULATOR.
> Press or to reveal ON.
> Press
GO
to store the setting, or …
> … press
EXIT
to leave all menus without storing.
Link frequency
If, for example, a TV channel in your area is
broadcasted on the same frequency as the
BeoLink system uses, 599 MHz, you must tune
the system modulator to an unused frequency.
When you change the link frequency in the
main room system, you may have to change
the link frequency in the link room system
accordingly.
To change the link frequency …
> Press
TV
to switch on the television.
> Press
MENU
to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press
GO
to bring up the OPTIONS menu.
CONNECTIONS is highlighted already.
> Press
GO
to bring up the CONNECTIONS menu
and press to highlight LINK.
> Press
GO
to bring up the LINK menu,
FREQUENCY is highlighted already.
> Press or or
0
–
9
to find an unused
frequency.
> Press
GO
to store the setting, or …
> … press
EXIT
to leave all menus without storing.
The MODULATOR menu is only available in the
main room and the FINE TUNE menu is only
available in the link room.
LINK FREQUENCY
search
store
GO
FREQUENCY
599
FINE TUNE
0
MODULATOR
AUTO
Summary of Contents for BeoVision 6
