Bang & Olufsen BeoVision 6, Reference Book, Page: 38 / 60

38
Connect additional video equipment
The diagrams on these two pages
outline how to set up the tele vision
with video sources and loud speakers,
and how to expand the set up, for
example with a compatible Bang &
Olufsen audio system, or with a
computer.
Refer to ‘Socket panel’ on page 36
for further information about each of
the sockets.
Refer to ‘Register additional video
equipment’ on page 40 for further
information about how to set up
connected equipment for use.
Video signals
Connect your video signal sources, such as cable
or aerial to the sockets mentioned in the diagram.
Loudspeakers
The television has built-in loudspeakers. However,
you can expand the system into a surround sound
setup – including a sub woofer. Refer to ‘
Loud-
speaker setup – surround sound’ on page 45 for
further information.
Remember to set the L – R switch on each loud-
speaker to L and R (the left and right sound
channel respectively).
Additional video equipment
The sockets on the socket panel allow you to have
different types of video equipment connected at
the same time. We expect your Bang & Olufsen
retailer to deliver, install and set up your products.
Equipment with HDMI™ input
Equipment with HDMI input can be connected to
any of the HDMI sockets, regardless of the
particular AV socket to which you have connected
the equipment. If an HDMI Expander is connected ,
use the HDMI-B socket.
POWER LINK
SUBWOOFER
POWER LINK
REAR
POWER LINK
FRONT
DVB IN
TV IN