Bang & Olufsen BeoVision 6, Reference Book, Page: 28 / 60

28
Adjust picture and sound settings
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brightness, colour or
contrast. Sound settings include
volume, bass and treble.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For information about how to change
the picture format, refer to the Guide
page 9.
Change brightness, colour or contrast
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled
when you switch off the television.
> Press TV to switch on the television.
> Press
MENU
to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press to highlight PICTURE.
> Press GO to bring up the PICTURE menu.
> Press or to step through menu items.
> Press or to adjust the values.
> Press
EXIT to store your settings until you
switch off the television, or …
> … press
GO
to store your settings permanently.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE* on Beo4,
then press GO. To restore the picture again, press
any source button, such as TV.
What’s on the PICTURE menu …
BRIGHTNESS … Adjusts the picture brightness.
CONTRAST … Adjusts the contrast level in the
picture.
COLOUR … Adjusts the colour intensity in the
picture.
TINT … Adjusts the colour shade or nuance on the
current channel. Only available for video sources
using the NTSC signal.
IMPORTANT! If a source such as a PC is connected
via the VGA socket, refer to page 12.
PICTURE
store
GO
BRIGHTNESS . . . . . . . .
CONTRAST . . . . . . . .
COLOUR . . . . . . . .
TINT . . . . . . . .
TV SETUP
select
GO
CHANNEL GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
CONNECTIONS
TUNER SETUP
SOUND
OPTIONS
select
GO
CONNECTIONS
TUNER SETUP
SOUND
PICTURE
CLOCK
MENU LANGUAGE
BRIGHTNESS
CONTRAST
COLOUR
*NOTE! In order to display P.MUTE on Beo4, you
must first add it to the Beo4 list of functions. For
further information, refer to the Guide enclosed
with Beo4.