Bang & Olufsen BeoVision 6, Reference Book, Page: 44 / 60

44
To calibrate the sound level …
> Press MENU to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press to highlight SOUND.
> Press
GO
to bring up the SOUND SETUP menu
and press to highlight SPEAKER LEVEL.
> Press GO to bring up the SPEAKER LEVEL menu.
SEQUENCE is highlighted.
> Press or to choose between AUTOMATIC
and MANUAL.
> Press or to adjust the speaker sound and
or to move to another speaker.
> When you have adjusted the sound for all the
speakers in your surround sound setup, press
GO to store or press EXIT to leave the menu
without storing.
It is not necessary to calibrate subwoofer sound in
a surround sound setup.
>> Loudspeaker setup – surround sound
Calibrate the sound level
When you have connected speakers in a
surround sound setup to the television,
you must perform a speaker calibration.
A calibration sound is produced
alternately in each of the speakers you
have connected in your surround sound
setup. Your task is to adjust the sound
level from all the connected speakers to
match the sound level from the centre
speaker. You can choose whether you
want the sound sequence to occur
automatically or manually.
Once you have performed your speaker
calibration, you will only need to re-
calibrate the speaker sound if you make
changes to the setup, for example, if you
move one or more of the speakers.
SPEAKER LEVEL
store
GO
SEQUENCE AUTOMATIC
LEFT FRONT . . . . . . . .
RIGHT FRONT . . . . . . . .
RIGHT REAR . . . . . . . .
LEFT REAR . . . . . . . .