Bang & Olufsen BeoVision 6, Manual

Page: 59 / 78

7
Register additional video equipment
If you connect additional video
equipment to your television, you
must register the equipment in the
connections menu.
When the system is first set up, the
equipment connected at that
particular moment is detected by the
television, and the CONNECTIONS
menu appears automatically on the
screen. If you connect equipment at
a later date, on a permanent basis,
then you must bring up the
CONNECTIONS menu via the
television’s SETUP menu.
For information about where and
how to connect extra equipment,
refer to the chapter ‘Socket panels’
on page 45 in the printed Guide.
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
What’s on the CONNECTIONS menu, p. 23.
CONNECTIONS
store
GO
V. TAPE V. TAPE
AV NONE
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
CONNECTIONS
SOUND
PICTURE
TV SETUP
back select GO
CONNECTIONS
SOUND
PICTURE
CLOCK
BEOLINK
MENU LANGUAGE
V. TAPE
AV
OPTIONS
back select
GO
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
▼
to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu.
CONNECTIONS is highlighted already.
> Press GO to bring up the CONNECTIONS menu.
> Press
ss
or
tt
to select the V.TAPE option which
corresponds to your setup.
> Press
▼
to move to AV and press
ss
or
tt
to
select the AV option which corresponds to your
setup.
> Press GO to store this setup.
> Press
▲
to back up through previous menus or
press EXIT to exit all menus directly.