Bang & Olufsen BEOSOUND 9000, Reference Book

Page: 23 / 40

23
For your aesthetic enjoyment you can
position your individual CD to make
the graphical design and text on the
CD present itself to your satisfaction.
When you store a position for each
CD, the BeoSound 9000 will
remember these positions. No matter
how many times you remove and
reload the CDs, the individual CDs
will be returned to these positions
every time they stop turning*.
Load and adjust a CD manually
When you have loaded a CD, you adjust the
position of the CD manually. Then you move
the carriage to this particular CD and access
the positioning function for CDs in order to
store the position you have chosen.
Press the direct CD selection button next to
the CD to move the carriage…
Press to select the CD
you want to position
Press to save the
position for the CD
while it is playing
POSITION OK? appears
Press to store the
position you chose for
the CD when it was
loaded
Repeat this procedure
for all the CDs you have
loaded…
Positioning CDs
Clear the positioning
If you want to clear the position for a CD,
move the carriage to the CD in question.
Press to select the CD
you want to clear
Press to access the
positioning function to
clear the position
Press to clear the
position
SELECT
SELECT
POSITION OK?
OK
SELECT
SELECT
CLEAR
*NOTE! Some CDs do not contain the information
required by the BeoSound 9000 in order to store
positions for CDs. Therefore, you may experience
that the position you have stored for a CD is not
adhered to by the BeoSound 9000. You will, of
course, still be able to play the CD in question.