22
Name your CDs
To distinguish between your
individual CDs, you can name them.
The name will then be shown in the
display when you load the CD.
You can store a total of 200 names in
your BeoSound 9000. Each name
may contain up to 12 characters,
including numbers. If you have not
given a name to the CD, the track
number, track time or elapsed time
will appear in the display instead.
You can access a list of CD names in
the display.
Name a CD
The CD you are naming must be playing in
the BeoSound 9000. If the CD has already
been named, you can change the name or
delete it, or you can just leave the function
by pressing CD.
See the list of CD names
When the list is displayed, you can delete the
names and any stored series of tracks at the
same time.
Press to play CD
Press to access the
naming function. ‘A’ is
blinking in the fi rst
character position
Press to reveal the
characters one by one
Press to move to the
next character, press
repeatedly to store the
name, or…
Press while you are
naming CDs or track
series in order to
automatically store the
name and exit the
naming function
To clear a name…
> Press
NAMING
to access the naming function.
> Press
CLEAR
to clear the name.
> Press
CD
to return to normal source operation.
The naming function can also be accessed
from your Beo4 remote control…
> Press the blue button for more than 1.5 sec. to
call up NAMING? in the display.
> Press
GO
and use the and buttons to select
characters.
> When you have fi nished, press and hold the
GO
button to move to the storing level.
> Press
GO
to accept and
EXIT
to leave the CD
naming procedure.
Press to play CD
Press to access the
naming list, CD LIST
appears briefl y, then
the name of the current
CD appears, for
example GLENN MILLER
Press to list the names
one by one and return
to names further up the
list
Press to clear a name
while the appropriate
name is displayed
Press to return to
normal source
operation
If the carriage is situated on a CD which has been
given a name or the CD has been edited, the
name or number of this CD will appear in the
display when you access the list. If the CD under
the carriage is unknown, the CD list will appear in
the display and you have to press the or
buttons to get a name or number displayed.
If you attempt to name or program track series for
more than 200 CDs the display will read CD LIST
FULL, and you will have to clear an entry before
you can add another.
CD
NAMING
A _ _ _ _ _ _ _ _ _ _ _
m
p
OK
CD
CD
NAMING
CD LIST
GLENN MILLER
m
p
CLEAR
CD
NOTE! It is only possible to name CDs with the Beo4
remote control if your BeoSound 9000 is in Option 1,
refer to page 33 for further information about Option
settings.
Summary of Contents for BEOSOUND 9000
Page 1: ...Reference book BeoSound 9000...
Page 40: ...www bang olufsen com...
