Bang & Olufsen BEOSOUND 9000, Reference Book

Page: 11 / 40

11
Digital output
The socket marked DIG. OUT carry the digital
signals from the CD player, and is intended
for connecting digital equipment (output
only).
Mains connection
Plug the mains lead into the socket marked ~.
When you have made all the connections,
replace the cover to hide the socket
compartment.
For safety reasons fasten the mains cord as shown,
before running it out from the socket
compartment.
Remove the cover in the bottom plate of the
BeoSound 9000 to gain access to the sockets.
The socket compartment contains the socket for
the mains cord.
The cover has two perforated sections, which you
can pry off in order to make a hole through
which to run the cables. Select one in an
appropriate position to suit your setup.
If you have set up the BeoSound 9000 on the
Stand, (see How to set up BeoSound 9000 ), a
different cover must be used. This new cover is
supplied with the Stand. Finally, connect the
BeoSound 9000 (and the other units in your system)
to the mains.