background image

BeoLink Converter NL/ML setup guide (Example 3)     29

BeoLink Converter NL/ML setup guide (Example 3)

This is a setup guide to Example 3 (Network Link and Master Link setup) 

page 22

, just without the Master Link Gateway. This setup with the 

specific settings is not a complete finish setup. This setup can be customized depending on the products and sources the customer has connected.

!  Set up sources in other NetWork Link products before setting up BeoLink Converter NL/ML. As the BeoLink Converter NL/ML makes initial source 

settings based on the products selected in the menus 

Connect to (primary)

 and 

Connect to (secondary)

. It can save a lot of manual work.

Set up the Beolink Converter NL/ML

Access the BeoLink Converter NL/ML.

-  Connect a computer to the Network Link router.
-  Access the router and check the DHCP Reservation to 

find the current IP-address for the BeoLink Converter 

NL/ML (It will be named BLC-<serial number>).

-  Leave the DHCP Reservation menu and enter the 

BeoLink Converter NL/ML IP-address in the address 
line of the Internet Browser. If the computer has 
Bonjour the BeoLink Convereter NL/ML can be found 
in same way as on an iPhone/iPad, see 

page 8

.

-  Access the BeoLink Converter NL/ML with the default 

username

 admin and 

password

 admin. (The setup 

app for smartphones/tablets can also be used). 

  Go to the menu: 

Configuration

 > 

Settings

ML Role

: Select V Master and press the 

Save

 button. 

(The BeoLink Converter NL/ML has this role seen from the Master Link side. The 

ML Role

 is default set to V Master).

Connect to (primary)

: Select Beovision 11 and press the 

Save

 button. (Select a product the BeoLink Converter NL/ML must be connected to).

NL Alias

: Leave the default name or select another desired name and press the 

Save

 button. (Select a name to the BeoLink Converter NL/ML).

  Go to the menu: 

Configuration

 > 

Sources visible on ML

  Only change the following settings if you wish other sources than those there already have been chosen in BeoVision 11.

NL product name

: Select which product to be distributed from.

NL source

: Select which source on the specific Network Link product to be distributed.

-  Press the 

Save

 button to store the settings.

 

BeoVision 11

Network Link

BeoMaster5

BS5

Power Link = Yellow

Master Link = Red

NL/ML Delay Box

BeoLink Converter

NL/ML

BeoLink Active

BeoVision 7
Master Link

Bedroom

Kitchen

Living room

Technic room

Library

Network Link = Green

Office

Internet

ISP Router

Network Link

router

Switch

NAS

server

BeoPlay V1

Network Link

IN

OUT

Optional

Summary of Contents for BeoLink Converter NL/ML














































Reviews: