Setting up NL/ML Delay Box 18
Setting up NL/ML Delay Box
To prevent echo in a Network Link/Master Link setup, with a Master Link Audio Master in the living room (main room) and other Master Link
products, it is possible to mount a NL/ML Delay Box. The sound can be synchronized by connecting an NL/ML Delay Box between the Audio Master
and the Master Link products.
Installation
- Disconnect all products in the setup from mains.
- Connect Master Link cable from BeoLink Converter
and Audio Master to
Master Link in
on the NL/ML
Delay Box.
- Connect Master Link cable from Master Link products
to
Master Link out
on the NL/ML Delay Box.
- Set up the dip switch on the NL/ML Delay Box.
The dip switch setting is based on the
ML delay
setting
value in the following menu on the BeoLink
Converter NL/ML:
Configuration
>
NL
management
>
NL Delay
>
ML delay setting
.
Use the delay overview
dip switch settings.
! If ML delay setting is outside the range (341 ms) of
NL/ML Delay Box i.e. more than 1000 ms then go to the following menu on the BeoLink
Converter NL/ML: Configuration > NL management > NL products and check if any
products are listed with wireless status. If any products are listed with wireless status you
have to do as follow:
1. Disable WLAN in these products
2. Delete the products from the list
3. Reboot the products
4. Check that the rebooted product shows up as wired in the NL Products list.
- Connect the NL/ML Delay Box and the other products in the setup to mains.
BeoVision 11
Network Link
BeoMaster5
BS5
Power Link = Yellow
Master Link = Red
NL/ML Delay Box
BeoLink Converter
NL/ML
BeoLink Active
BeoVision 7
Master Link
Bedroom
Kitchen
Living room
Technic room
Library
Network Link = Green
Office
Internet
ISP Router
Network Link
router
Switch
NAS
server
BeoPlay V1
Network Link
IN
OUT
Optional
MasterLink in
6Vdc/150mA
1 2 3 4 5
Delay
10 - 340ms
MasterLink out
1 2 3 4 5
Dip switch on
NL/ML Delay Box