3.4 Adjustments and Repair tips
Geometry adjustment
Geometry adjustment is normaly not necessary.
The geometry may be checked.
It is recomended to use a tv test generator, but to verify the different formats the
Integrated Living test DVD can be used.
Geometry formats is shown below.
It is possible to adjust the size and position in the SERVICE MENU - MONITOR
SERVICE MENU - GEOMETRY ADJUSTMENTS.
Geometry is adjusted in FORMAT and the values for all other picture formats are
calculated.
The picture format 4:3 must be enabled in SERVICE MENU - TELETEXT & FORMAT
ADJUST.
Geometry Adjustment procedure
. Check the geometry specifications in FORMAT .
FORMAT , 6:9 Panorama
FORMAT , 5:9
FORMAT , 4:3
FORMAT 2, 6:9 Letterbox
FORMAT 3, 6:9 - use the 6:9 testpicture.
2. Insert/adjust the default factory values in SERVICE MENU - MONITOR SERVICE
MENU- GEOMETRY ADJUST LCD if necessary.
Geometry default factory values:
HOR SIZE
980
VERT SIZE
548
HOR POSITION
05
VERT POSITION
9
Remember to disable picture format 4:3.
Geometry specifications
Format
6:9 Panorama
Format
5:9
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
